Gearbox - Ford Sierra

A gearbox rebuild kit comprising of 1x input shaft bearing, 1x main shaft front bearing, 1x main shaft rear bearing, 1x lay shaft bearing, 1x lay shaft needle roller bearing set, case gasket and oil seals.

This kit is suitable for all 1.6, 2.0 OHC & 2.3/2.8 5 Speed Ford Sierra models fitted with the type 9 gearbox.

Speedo drive cover cap suitable for all 5 speed Ford Sierra models with a type 9 gearbox

Gasket and seal set suitable for all 5 speed Type 9 gearboxes.Includes gaskets for top lids, case, nose cone and gearstick housing and rubber seals for input shaft, prop-shaft & speedo drive.

Gasket and seal set suitable for all 4 speed Type E Rocket gearboxes.Includes gaskets for top lid, case, nose cone and gearstick housing and rubber seals for input shaft, prop-shaft & speedo drive.

Seal set suitable for all 5 speed Type 9 gearboxes fitted to many rear wheel drive Fords. Includes rubber seals for input shaft, prop-shaft tail and speedo drive.

Seal set suitable for all 4 speed Type E "Rocket" gearboxes to many 2 litre OHC powered rear wheel drive classic Fords. Includes rubber seals for input shaft, prop-shaft tail seal & speedo drive.

This kit is the standard 1.6 OHC 4 speed clutch kit - but NOT usually 1.6GT or 1.6S models.

Centre plate has 20 splines and is 7.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

This kit fits all standard 5 speed 1.6 OHC Ford models. 
Centre plate has 23 splines and is 190mm/7.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

This kit fits almost all 4 and 5 speed 2.0 OHC Pinto powered Ford models.

Centre plate has 23 splines and is 8.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

This kit is suitable for all late 2.5 and 3.0 Essex V6 (1972 onwards) Ford models and also Cologne 2.3 and 2.8 V6 models.

Centre plate has 23 splines and is 9.5 inches diameter.

All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes a pressure plate, friction plate and release bearing.

Clutch release bearing suitable for many Ford models from 1970s and 1980s.

Inner diameter is 34mm and total depth is 35mm.

Deep clutch release bearing suitable for many smaller engined Ford models from 1970s and 1980s.

Inner diameter is 34mm and total depth is 42mm.