Ford Capri rubber suspension top mounts and roller top mounts

Suspension Top Mounts - Ford Capri

High performance roller top mounts fitted with spherical bearings and a shock absorbing rubber encapsulated steel centre.

These mounts will lighten the steering at lower speeds and give the steering a smoother feel.

Please note that when replacing standard top mounts with roller top mounts the suspension will raise by 25mm. Lowered front coil springs can be ordered from our springs section to compensate for this

We can now also supply standard rubber top mounts.

Order on line now or by telephone 01322 839303 if you wish to discuss your requirements.

Add to cart
 
Complete roller top mount kit - comprising 2 top mounts, 5/8" adaptor sleeves and dust covers for all late Mk1, Mk2 & Mk3 Ford Capri models

Kit suitable for all late Mk1, Mk2 & Mk3 Ford Capri models using shock absorbers with 5/8" top pin

More details
Add to cart
 
Complete roller top mount kit - comprising 2 top mounts, 1/2" adaptor sleeves and dust covers for all early Mk1 Ford Capri models

Kit suitable for all Mk1 Ford Capri models using early type shock absorbers with 1/2" top pin

More details
Add to cart
 
Single roller top mount for all Ford Capri models
Single roller top mount - fitting adaptor sleeves are sold separately - order 1/2" sleeve for early Mk1 or 5/8" sleeve for late Mk1, Mk2 & Mk3 Ford Capri models - spherical bearing type, so can cope with camber and caster properly.
More details

Ford Capri Top Mount Dust Covers

RTMFC4
Add to cart
 
Pair of Ford Capri roller top mount dust covers

Ford Capri Top Mount Sleeve

RTMFC5
Add to cart
 
5/8" Ford Capri roller top mount adaptor sleeve
Single 5/8" roller top mount sleeve for fitting top mounts to late Mk1, Mk2 & Mk3 Ford Capri models - please measure strut insert diameter before ordering

Ford Capri Top Mount Sleeve

RTMFC6
Add to cart
 
1/2" Ford Capri roller top mount adaptor sleeve
Single 1/2" roller top mount sleeve for fitting top mounts to early Mk1 Ford Capri models - please measure strut insert diameter before ordering

Ford Capri Top Mount

43210310
Add to cart

Ford Capri Standard Suspension Top Mount - 5/8" (16mm) bore for Late Mk1, Mk2 & Mk3 shock absorber inserts

 

Standard replacement suspension top mount suitable for all Ford Capri models using a front shock absorber insert with a 5/8" (16mm) outer diameter rod (Facelift Mk1, all Mk2 & Mk3 models). Note this is not suitable for early Mk1 models using a front shock absorber insert with a 12.5mm (1/2") outer diameter rod.

Ford Capri Top Mount

43210320
Add to cart
Ford Capri Standard Suspension Top Mount - 1/2" (12.7mm) bore for early Mk1 shock absorber inserts
Standard replacement suspension top mount suitable for all Mk1 Ford Capri models using a front shock absorber insert with a 1/2" (12.7mm) outer diameter rod.
!