Ford Cortina MK3 MK4 MK5 gearbox parts

Gearbox - Ford Cortina

Type 3 Gearbox - internal rail 4 speed gearbox with screw in gearstick fitted to many 1.3 and 1.6 litre models

Type E Rocket box - 4 speed box only used on most 2.0 OHC Cortinas and 2.3 V6

Type 9 Gearbox - internal rail 5 speed gearbox with bolt on gearstick fitted to all Cortina 5 speed models



Order on line now or by telephone 01322 839303 if you wish to discuss your requirements

Add to cart

Ford release arm dust boot

Ford clutch cable/release arm arm dust boot gaiter cover thingy.

More details
Add to cart
Paper gasket set for the Ford type 9 gearbox.

Set of paper gaskets for the Ford type 9 5 speed gearbox. bell-housing gasket, top gasket, cone gasket and body gaskets.

More details
Add to cart
Paper gasket set for the Ford type E Rocket gearbox.

Set of paper gaskets for the Ford type E (Rocket) 4 speed gearbox. bell-housing gasket, top gasket, cone seal and tail gasket.

More details
Add to cart
 5 Speed Type 9 Gearbox Gasket and Seal Set

Gasket and seal set suitable for all 5 speed Type 9 gearboxes.Includes gaskets for top lids, case, nose cone and gearstick housing and rubber seals for input shaft, prop-shaft & speedo drive.

More details
Add to cart
4 Speed Type E Rocket Gearbox Gasket and Seal Set

Gasket and seal set suitable for all 4 speed Type E Rocket gearboxes.Includes gaskets for top lid, case, nose cone and gearstick housing and rubber seals for input shaft, prop-shaft & speedo drive.

More details
Add to cart
Ford type 9 seal set
Ford 5 Speed Type 9 Gearbox Seal Set.

Seal set suitable for all 5 speed Type 9 gearboxes fitted to many rear wheel drive Fords. Includes rubber seals for input shaft, prop-shaft tail and speedo drive.

More details
Add to cart
Ford 4 Speed Type E "Rocket"  gearbox seal set

Seal set suitable for all 4 speed Type E "Rocket" gearboxes to many 2 litre OHC powered rear wheel drive classic Fords. Includes rubber seals for input shaft, prop-shaft tail seal & speedo drive.

More details
Add to cart

Ford 1.6 OHC 4 Speed Clutch Kit

This kit is the standard 1.6 OHC 4 speed clutch kit - but NOT usually 1.6GT or 1.6S models.

Centre plate has 20 splines and is 7.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

More details
Add to cart
Ford 1.6 OHC 5 Speed Clutch Kit

This kit fits all standard 5 speed 1.6 OHC Ford models. 
Centre plate has 23 splines and is 190mm/7.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

More details
Add to cart
Ford 2.0 OHC 4 & 5 Speed Clutch Kit

This kit fits almost all 4 and 5 speed 2.0 OHC Pinto powered Ford models.

Centre plate has 23 splines and is 8.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

More details
Add to cart

Ford V6 Clutch kit

This kit is suitable for all late 2.5 and 3.0 Essex V6 (1972 onwards) Ford models and also Cologne 2.3 and 2.8 V6 models.

Centre plate has 23 splines and is 9.5 inches diameter.

All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes a pressure plate, friction plate and release bearing.

More details
Add to cart
Ford standard clutch release bearing

Clutch release bearing suitable for many Ford models from 1970s and 1980s.

Inner diameter is 34mm and total depth is 35mm.

More details
Add to cart
Ford deep clutch release bearing

Deep clutch release bearing suitable for many smaller engined Ford models from 1970s and 1980s.

Inner diameter is 34mm and total depth is 42mm.

More details
!