Clutches - Ford Capri

This kit is the standard 1.6 OHC 4 speed clutch kit - but NOT usually 1.6GT or 1.6S models.

Centre plate has 20 splines and is 7.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

This kit fits all 1.6 OHC GT and S type 4 speed 1.6 Mk1,2 & 3 Ford Capri models - 1600GT and 1600S models only.
Centre plate has 20 splines and is 215mm/8.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

This kit fits all standard 5 speed 1.6 OHC Ford models. 
Centre plate has 23 splines and is 190mm/7.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

This kit fits almost all 4 and 5 speed 2.0 OHC Pinto powered Ford models.

Centre plate has 23 splines and is 8.5 inches diameter. All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes pressure plate, friction plate and release bearing.

This kit is suitable for all early 3.0 (up to 1971) Ford Capri models.
Centre plate has 23 splines and is 9.5 inches diameter.

All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes a pressure plate, friction plate and release bearing.

This kit is suitable for all late 2.5 and 3.0 Essex V6 (1972 onwards) Ford models and also Cologne 2.3 and 2.8 V6 models.

Centre plate has 23 splines and is 9.5 inches diameter.

All clutch kits carry 12 months warranty.

Kit is supplied as a 3 piece kit which includes a pressure plate, friction plate and release bearing.

Clutch release bearing suitable for many Ford models from 1970s and 1980s.

Inner diameter is 34mm and total depth is 35mm.

Deep clutch release bearing suitable for many smaller engined Ford models from 1970s and 1980s.

Inner diameter is 34mm and total depth is 42mm.